Standard non-pressed PVC Belt for Environment above -10℃
Covers are PVC with gauge less than 0.8mm, non-pressed.
Pressed PVC Belt for Environment above -10℃
Covers are PVC with gauge up to 4mm, pressed. Impact resistance, water soaking and high splice sufficiency.
PVG Belt for Environment above -10℃
Covers are nitrile rubber. Suitable for steep gradient (<20 degree lifting angle) conveying.
DYNA Belt for Environment above -15℃
Covers are high abrasion resistant and high impact resistant rubber. Suitable for above ground application.
Belt load is carried by solid woven carcass, which is impregnated with PVC paste then protected with PVC or PVG covers.
Features:
Fire resistant
Anti-static
Light weight
High elongation at break
Good adhesive
High impact resistance
Suitable for underground coal mine and explosion risk area
Applicable code: MT914, SANS 971,AS 4606,BS3289,BC158
